FIMA FI32N Uso Y Mantenimiento página 17

CLEANING MACHINE
End of the day cleaning
•
Remove the plug from the electrical socket at the end of the day.
•
Clean thoroughly using a damp cloth with a neutral cleaning product, which is non-corrosive, non-hazardous and
non-flammable.
•
Clean external machine parts with a damp sponge.
•
Do not use metallic pads and abrasive detergents.
Roller blade cleaning
•
Unhook the springs on the lower rollers by pushing them outwards.
•
Rotate the pins inwards and clean the roller blades with a damp cloth.
•
To return the roller blades to their initially position, follow the above
directions in reverse order.
Extended periods of disuse
For extended periods of disuse, turn off the main wall switch, clean the machine and cover it with a cloth to protect if
from dust.
Troubles shooting
In the event of breakdown or malfunctioning, turn off the wall fuse and contact your Dealer's service centre. Avoid
dismantling internal machine parts.
The manufacturer is not liable for any machine tampering!
Problems, causes, solutions
Problem
The machine does not
start
Cause
Main switch off
No voltage on the power supply
Either the electric motor or the circuit board
is defective.
Safety fuse burnt out
Upper rollers protective cover raised
Turn on main switch to "I"
Contact your dealer's service centre
Contact your dealer's service centre
Contact your dealer's service centre
Lower the cover
9
Solution