Comelit Mifare FT SK9032 Hoja Técnica página 3

GENERAL INTRODUCTION
The SK9032 Flush mounted Mifare® Reader must be used in connection with SK9020
Control Unit.
The token is read by swiping it over the reader.
Flush fitting dimensions
Connection diagram with unit SK9020
Technical characteristics
• RS485 communication
• Operating voltage: 12 -14 V dc
• Consumption when idle: 50 mA
• Consumption when reading: 70 mA
• Operating temperature: -10°c - +55°c
• Dimensions (H X L X D): 80 x 80 x 60 mm
• Reading distance: 2 cm approximately
FT SK9032
3
FT SK9032