Publicidad
Ignition OFF
Ignition ON
Ignition ON
Ignition ON
1.
Ignition ON
Indicator failure detection and lamp substitution if the trailer indicators fail
The failure of a single or on both trailer indicators will be shown depending on the type of vehicle and electric kit installed as follows:
• Increase in the flashing frequency
• Text message in the Display / combi-instrument
• Activated control lamp for light failure
• Audible warning via Buzzer or Voice-Message
If an indicator fails the left or right rear light compensates the faulty indicator by flashing at the correct frequency! ( lamp substitution).
/
87360537/26.01.2016
© ConWys AG / Buzibachstrasse 31a / CH-6023 Rothenburg / FON: +41 41 317 20 50 / FAX: +41 41 317 20 51 / www.conwys.ch / mail to: info@conwys.ch
Diagnosis function of control LEDs
GN
RD
GN
GN
GN
RD
3.
RD
1x
max 60 sec.
or
2.
RD
=
No CAN-Data
CAN-Data Wire
/31:
B+/30:
Standby /
Sleepmode
PIN 13+14
PIN 1
PIN 2 or 4
12/13
Publicidad
