Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
Intended Use
This orbital sander i s intended for dry sanding of wood, plastic, metal and filler materials well as painted
surfaces.
The tool must not be modified or used for any other purposes than the ones described in these instruc-
tions.
Power Switch
> On: Shift the ON/OFF switch slider to "I" position.
> Off: Shift the ON/OFF switch slider to "O" position.
Changing A Sanding Sheet
The sanding sheet and sanding pad are provided with a hook and loop attachment system to allow
quick and easy changing of sanding and polishing sheets.
To attach a new sheet:
> Align the edge of the disc with the edge of the pad, and ensure the sheet is centered in the plate.
> Apply pressure to the disc, ensuring it is securely fixed across the entire sanding pad.
To remove a disc:
> Lift one comer of the sanding disc and pull off from the sanding pad.
Adjusting Speed
> Disc speed can be varied by rotating the speed adjustment wheel.
> The wheel allows fine control between minimum (6.000rpm) and maximum (12.500rpm) speeds.
Dust Suction
> Efficiency and durability of sandpaper are much improved by dust suction through the apertures in the
disc and sandpaper.
> Dust collector must be emptied regularly.
Vacuum Adaptor
> The adaptor ensures coupling to vacuum cleaner in case of increased dust generation.
> Dismount the collector and fasten the tool to a vacuum cleaner.
Sanding Surfaces
> Place the machine flat on the work piece, ensuring the entire plate makes even contact.
> Turn on the sander.
> Apply uniform sanding pressure.
> Adjust the tool speed & pressure to suit the work as required.
5
Publicidad
