Hitachi RP300YDL Manual Original página 17

be harmful. Contact with or
inhalation of the dust may cause
allergic reactions and/or
respiratory diseases to the
operator or bystanders.
Certain kinds of dust are classified
as carcinogenic, such as oak and
beech dust, especially in
conjunction with additives for wood
conditioning (chromate, wood
preservative).
3. Overview
See page 2.
1 Switch On/Off/Automatic operation/
2 Plug socket for power tool
3 Upper part
4 Button for filter cleaning 'PressClean' (PC)
5 Exhaust port
6 Snap lock
7 Suction opening
8 Container
9 Fleece filter bag
10 PE filter bag
11 Pleated filter
12 Filter cage
4. Initial Operation
Before plugging in the appliance, check
that the rated mains voltage and mains
frequency, as specified on the rating label,
match your power supply.
Attach the handle connecting piece or coupling to
the suction hose (see illustration A, page 2.).
Prepare the suction tube as shown for storage in the
repository (see illustration C, page 2.).
4.1 Inserting a Fleece Filter Bag (9)
Switch off appliance. Unplug mains cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (6). Remove the upper part (3) from
the container (8).
See illustration B, page 2. Holding the new filter bag
by the flange, push it together with the rubber
diaphragm over the suction connection. Ensure that
the rubber diaphragm is fitted over the thicker
section.
Replace the upper part of the appliance on the
container and close the snap locks.
4.2 Inserting a PE Filter Bag (10)
Switch off appliance. Unplug mains cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (6). Remove the upper part (3) from
the container (8).
See illustration B, page 2. Holding the new filter bag
by the flange, push it together with the rubber
diaphragm over the suction connection. Ensure that
the rubber diaphragm is fitted over the thicker
section.
Spread out the PE filter bag (10) evenly across the
container floor. Arrange the edges of the PE filter
bag around the container rim so that the bag is firmly
clamped on all sides by the attached upper part (3).
Replace the upper part of the appliance on the
container, close the snap locks.
5. The Appliance
5.1 Switching On/Off, automatic operation
Select operating mode on switch (1):
0 = Vacuum cleaner off
I = Vacuum cleaner on (manual operation)
= Automatic On/Off switch:
The vacuum cleaner is switched on or off
by means of a power tool connected to the
mains socket (2).
5.2 PressClean
See illustration E, page 2. To clean the pleated filter
(11) using a strong air flow: Press the button (4)
during the work breaks (press down three times)
while keeping the suction opening shut (on the
suction hose or on the container).
5.3 Integrated blower function
For air-cleaning, drying purposes and diverting
extracted air. For this purpose, insert a suitable
hose (scope of delivery) in the exhaust port (5).
Do not allow the emitted blower air to enter
confined spaces uncontrollably. Ensure the
hose used is clean. Dust can be hazardous to
health.
5.4 Power socket (2)
The power socket (2) is designed for connec-
tion to a power tool only.
The total maximum permissible current
consumption (of vacuum cleaner and
connected unit) must not exceed the value I
table, page 3).
If the switch (1) is in the '
cleaner is switched on or off by means of a power
tool connected to the mains socket (2).
ENGLISH en
(see
max
' position, the vacuum
de
fr
nl
it
es
pt
sv
fi
no
da
pl
el
hu
ru
17