Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FG-1 FOAM
GENERATOR
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES

Publicidad

loading

Resumen de contenidos para Oh!FX FG-1

  • Página 1 FG-1 FOAM GENERATOR INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES...
  • Página 2 INSTRUCTION MANUAL FG-1 FOAM GENERATOR The FG1 is the new standard foam generator with cascade eff ect for excellence. The FG1 is able to produce a large amount of foam even working with low water pressure. It is the fi rst foam generator in the market that works at low voltage, a feature that completely eliminates the risk of electrocution even if the generator is accidentally submerged in water.
  • Página 3 INSTRUCTION MANUAL ASSEMBLY AND OPERATION 1. Placement: Place the foam generator FG1 (6) on a fl at and stable surface, on a tripod by means of the tripod accommodation (15) or hang on a structure by means of two clamps in the anchoring holes (8).
  • Página 4 INSTRUCTION MANUAL 3/B – Pumping PREMIX. Working with PREMIX means having the foam fl uid already diluted and mixed in a tank from which the mixture is directly pumped to the foam generator. 3/B-1. Fill your tank with water and add the foam FLUID at the rate indicated on the bottle of your foam fl...
  • Página 5 INSTRUCTION MANUAL GENERAL CAUTION FOR FG1 FOAM GENERATOR • The FG1 Foam generator has been designed for the described eff ect. Any other use will exclude Oh! FX (CONFETTISHOTS SLU) from all liability and guarantee. • Use only the consumables provided for this use and duly certifi ed. •...
  • Página 6 MANUAL DE INSTRUCCIONES FG-1 FOAM GENERATOR El FG1 es el nuevo generador de espuma estándar por excelencia. El FG1 es capaz de conseguir una enorme producción de espuma incluso trabajando con baja presión de agua. Es el primer generador de espuma del mercado que trabaja a bajo voltaje, característica que elimina completamente el riesgo de electrocución incluso si el generador se sumerge...
  • Página 7 MANUAL DE INSTRUCCIONES MONTAJE Y OPERATIVA 1. Colocación: Coloque el generador de espuma FG1 (6) en una superfi cie plana y estable, en un trípode mediante el vaso para trípode (15), o colgada en una estructura mediante dos abrazaderas en los orifi cios de anclaje (8). Asegure la máquina con un cable de seguridad adecuado al peso de la máquina.
  • Página 8 PRECAUCIÓN • La máquina FG1 Foam Generator ha sido diseñada para el efecto descrito. Cualquier otro uso excluirá a Oh!FX (CONFETTISHOTS SLU) de toda responsabilidad y garantía. • Utilice sólo los consumibles previstos para este uso y debidamente certifi cados.
  • Página 9 www.ohfx.eu...