Quasar SQ3202 Manual De Instrucciones página 10

All manuals and user guides at all-guides.com
Installation Guide
Press MENU button to display the MAIN OSD MENU; Press
MENU you want; Press ENTER button to enter the sub menu; Press
option and then press /
go back to the upper menu or EXIT button to close the OSD.
PICTURE
You can select the type of picture, which best corresponds to your viewing. Press the "MENU"
button to enter the OSD menu .Then press
"e/f" button to select the "PICTURE"
menu.
1. Press "d" button to select "Picture
Mode", press " e/f " button to select.
2. Press "c/d" button to
"Brightness" and press the "e/f"
button to enter brightness adjustment
menu to adjust brightness.
3. Press "c/d" button to select
"Contrast" and press the "e/f" button
to enter contrast adjustment menu to adjust contrast.
4. Press "c/d" button to select "Color" and press the "e/f" button to enter color adjustment
menu to adjust color.
5. Press "c/d" button to select "Tint" and press the "e/f" button to enter hue adjustment menu
to adjust tint.
Note: The 'Tint' item is used in NTSC mode only.
6. Press "c/d" button to select "Sharpness" and press the "e/f" button to enter sharpness
adjustment menu to adjust
sharpness.
7. Press "c/d" button to select
"Color Temperature" and press the
"e/f" button to select.
8. Press "c/d" button to select
"Advanced Setting" and press the
"ENTER/f" button to enter
sub-menu.
a. Press "c/d" button to select
to adjust the value in the sub menu; You can press MENU button to
select
8
/ button to select the
/ button to select the