Alera ALE-AEMA1H Manual De Instrucciones

2.95"x2.95"
75x75mm
3.94"x3.94"
10"-30"
100x100mm
PART ITEM
A
4x12mm
B
5X12mm
C
6x12mm
D
6x10mm
F
¢6.5x¢13X1.8
G
4x4mm
H
5x5mm
1
Bottom support 1
2
Screw
3
Washer
Product support and parts: 1-800-733-4000
Monitor Arm
Important:
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
● The desk or mounting surface must be capable of supporting the combined weight
● Safety gear and proper tools must be used. A minimum of two people are required
● Please check joint parts every two months, making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the
mount will support the combined load of the equipment and hardware. Never exceed
the maximum load capacity 10 KG/ 22.05 lbs, or else it may result in product failure or
personal injury.
Note: this product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury.
4-10kg
8.82-22.05lbs
QTY.
4
4
3
2
8
1
1
1
1
1
07-016/1
installation. If you are unsure of any part of this installation, please contact a
professional installer for assistance.
of the mount and the display, otherwise the structure must be reinforced.
for this installation. Failure to use safety gear can result in property damage,
serious injury or death.
PART
4
Butterfly knob
5
Bottom support 2
6
Knob
7
Cable cover 1
8
Nylon ties
9
Anti-slip rubber 1
10
Anti-slip rubber 2
11 Anti-slip rubber 3
12 Cable cover 2
One Parkway North, Deerfield, IL 60015 © 2016 Essendant Co.
ALE-AEMA1H
ITEM QTY.
1
1
1
1
6
1
1
1
1
Manufactured for Alera / Essendant Co.
®
Made in China