Chauvin Arnoux PA40W-2 Manual De Instrucciones página 11

The PA40W-2 power supply and battery charger are used to power the instrument for long-term applications and thereby economize
the instrument's internal battery. It also serves to recharge the battery.
„ Connect the Schuko -C5 mains cord to a mains socket.
®
„ Open the elastomer cap and connect the specific connector of the power supply to the instrument.
N L1 L2 L3 N L1 L2 L3
QUALI ST R
C.A 8345
Class
POWER & QUALITY ANALYSER
The indicator lights:
„ green to indicate the power-on condition,
„ then orange to indicate that the battery is charging,
„ and finally green to indicate that the charge is complete.
If it blinks, the battery is missing and the instrument is powered by the external power supply alone.
2. USE
11