Candy 1486DWHC7 Manual De Instrucciones página 60

7. QUICK USER GUIDE
This appliance automatically adjusts the
level of the water to the type and quantity of
washing. This system gives a reduction in
energy consumption and a saving in
washing times.
Program selection
l
Turn on the appliance and select the
required program.
l
Adjust the washing settings if necessary
and select the required options.
DRYING (WASHER-DRYERS only)
If you would like the drying cycle to
begin automatically after washing,
select the washing
required and select the drying cycle.
Or you can finish the wash and then
select the drying programme.
l
Press the START (PLAY)/PAUSE button
to start the program.
l
At the end of the program, the message
"END" will appear on the display (on
some models, all wash stage indicators
lights will turn on).
l
Turn off the appliance.
For any type of wash, see the program
table and follow the operating sequence
as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
8. CONTROLS AND
programme
A SMART RING (programme
B PLAY/PAUSE button
C DELAY START button
D OPTIONS button
E STAIN LEVEL/ALTERNATIVE
F TEMPERATURE SELECTION
G SPIN SELECTION button
H STEAM button
F+G CHILD LOCK
I
60
PROGRAMS
90° ° 1000
Pre
60° ° 800
40° ° 600
30° ° 400
Kg Detector
20° °
I
90° ° 1000
800
60° °
40° ° 600
30° ° 400
Kg Detector
20° °
F G H B
selection ring)
PROGRAMME SELECTION button
button
Digital display
OFF
A
Pre
C D E