V-TAC VT-303 Manual Del Usuario página 4

PRECAUTIONS FOR USE
1: High temperature protection. When the temperature is greater than or equal to 75°C, the
machine will start the automatic protection and prohibit input and output. When the tempera-
ture is less than 75°C, it will return to normal.
2: Power on / off key. Please click the power key to turn off the power.
3: When the indication of DC, USB and AC lights up, it means that the output port has been
turned on, and the corresponding equipment can be powered.
4: When not using the power output port, please press 1,2,7,11 or power key to turn off the
power to save power.
5: At low temperature, the battery capacity of the product may be affected. The product can
be charged in the temperature range of 0-40°C, and the equipment can be powered in the
temperature range of -10°C to +40°C.
6: For the first time, it is recommended to fully charge the battery to avoid the inconvenience
caused by insufficient power.
CHARGING MODE
Before using or storing the product, please use the charger to charge the product. When
charging, the indicator light is blue. The LED screen will display the current charging ratio and
charging power. When the LED screen shows 100% power, it means full charge. The charging
process is about 7.5 hours. The current power can be viewed through the LED screen.
Standard charger,
about 7.5 hours
The generator generates electricity and
uses the standard charger for about 7.5 hours
Car charger,
about 9 hours
100W solar photovoltaic panel,
about 10hours.
(the charging time is determined by the intensity of sunlight).
Support solar photovoltaic charge controller (12-24V).
The above data are from the laboratory. The test data may vary due to the use environment,
use method and other factors, and the charging time will be different. This test data is for
reference only.