Descargar Imprimir esta página

Joycare JC-1213 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
The car seat is approved for use for the transport of children weighting between 15 kg and 36 kg,
group II, III. It's a booster seat designed to ensure a correct fit for a 3-point adult seat belt.
It must only be used in a forward facing position. Only suitable if the approved vehicles are fitted
with safety belts approved to ECE R16 or other equivalent standards.
1) Place the child seat in the car seat where fitted a seat belt and then position the child.
2) Fit the car's seat belt as for normal use: ensure the lap belt passes through the armrests of the child
seat. The child seat must be placed as close as possible to the car seat backrest, to allow the most
comfortable position for the child.
ABOUT THE CLEANING AND MAINTENANCE OF COVER
The cover is a safety feature. Never use the child seat without it. The cover is removable and washable
at 30C. The cradle safety put your child's safety at risk by using other replacement cover, they could
stop the child seat from protecting your child as well as it should. belts and plastic component can
be washed by soft scour and warm water. Don't use any chemical scour bleacher and corrosive.
Machine wash, cold Dry clean, any solvent except trichloroethylene. Do not bleach Do not tumble
dry Do not iron.
Wash cold water 30°
Suitable for dry cleaning in Tetrachloroethylene
Do not bleach
6
INSTRUCTIONS FOR USE
FITTING THE CAR SEAT
REMOVING THE FABRIC COVER
The outer fabric of car seat is polyester 100%. It is possible to remove
and to wash the lining. Remove the cover by press the booster with
one hand and other hand pulling it, and wash it carefully following
instructions on the label attached to the seat cover.
ATTENTION: Follow the instructions on the label attached to the seat
cover.
IMPORTANT

Publicidad

loading

Este manual también es adecuado para:

Jc-1214Jc-1241