Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
688Wb
Hawthorne Office
Chair
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb or stand on this piece of furniture.
• Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
• Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
10/13

Publicidad

loading

Resumen de contenidos para Whittier Wood Furniture 688Wb

  • Página 1 Model # 688Wb Hawthorne Office Chair IMPORTANT NOTES: • For normal household use only. Not recommended for commercial use. • Do not climb or stand on this piece of furniture. Assembly Instructions • Before you begin your project, completely read the Assembly Instructions and Finishing Hints.
  • Página 2 688Wb Hawthorne Office Chair — Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name. Part Description Quantity Back Assembly...
  • Página 3 Figure 2. Match up the four small screw holes in the Tilter Mechanism with those in the bottom of the seat. Screw the mechanism in place with four #14 x 1" Philtruss Screws (Y). Page 3 — 688Wb — 10/13...
  • Página 4 Lower the chair seat on to the Gas Cylinder so that the chrome section fits into the hole in the Tilter Mechanism (H). Sit in the chair to secure the fit. This will lock the Gas Cylinder to the Tilter Mechanism. Page 4 — 688Wb — 10/13...
  • Página 5 Turn the Adjustment Knob clockwise to increase the tension. Turn the knob counter-clickwise to loosen the tension. to lock the tilt mechanism, push the lever in and it will prevent the chair from tilting. Page 5 — 688Wb — 10/13...
  • Página 6 Modelo # 688Wb Silla Hawthorne para Escritorio NOTAS IMPORTANTES: • Para uso de viviendas normales únicamente. No se recomienda para uso comercial. • No se suba ni se pare sobre esta mueble. Instrucciones de ensamblar • Antes de comenzar su proyecto, lea completamente las instrucciones de ensamblar y las indicaciones finales.
  • Página 7 Atornille DE LOS ORIFICIOS UTILIZANDO el mecanismo en su lugar con cuatro tornillos UN DESTORNILLADOR COMÚN. Utilice un philtruss #14 x 1" (Y). destornillador común/ranurado para alinear la ranura de la tuerca. Page 2 – 688Wb SP – 10/13...
  • Página 8 Para apretarlo, siéntese en la silla y así encajará el cilindro neumático en el mecanismo de inclinación. Page 3 – 688Wb SP – 10/13...
  • Página 9 No. De Modèle 688Wb Chaise Hawthorne de Bureau REMARQUES IMPORTANTES : Instructions d’assemblage • Pour un usage domestique uniquement. Non recommandé pour un usage commercial. • Ne pas monter ni se mettre debout sur cet article d’ameublement. • Avant de commencer, lire attentivement les instructions d’assemblage et les conseils de finition.
  • Página 10 à ceux ménagés standard/pour écrous à fente pour aligner la rainure dans le fond du siège. Vissez le mécanisme en place dans l’écrou. au moyen de quatre vis philtruss no. 14 x 1 po (Y). Page 2 – 688Wb FR – 10/13...
  • Página 11 à ce que la section en chrome s’insère dans le trou du mécanisme de bascule. Pour serrez, asseyez-vous dans le fauteuil; le cylindre pneumatique se bloquera sur le mécanisme de bascule. Page 3 – 688Wb FR – 10/13...
  • Página 12 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
  • Página 13 Whittier Finishing Hints apply additional coats. Lightly sand and wipe surface Preparing the surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.
  • Página 14 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 15 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
  • Página 16 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 17 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait toujours les instructions figurant sur le produit. d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...