Publicidad
Idiomas disponibles
Idiomas disponibles
3
ENGLISH:
Rear connections
1
GPS
Remote
RS-232
5
1
Optional GPS & Remote Control Connector:
The left side connector links up with the GPS receiver
to capture position information data. The right side
connector links up with the remote controller.
2
Audio Out/Video Out:
Your LCD monitor or other monitor can recieve a signal
(RCA Audio and Video Output to monitor) from this port.
3
AUX 1/AUX 2:
Use this if you have external audio sources. (RCA Audio
Inputs for use with external audio sources).
4
Camera in connector:
There are four connectors here to connect up to 4 Elite/
Extreme cameras.
5
RS 232 port:
Service only.
2
3
Audio Out
AUX1
Video Out
AUX2
I/O
IN1 IN2 IN3 IN4
12V 9V 6V
OUT1
OUT2
6
9
4
1
2
3
Camera In
G-SENSOR
Power Delay
10
6
I/O port:
This connector links up with an external device. (Alarm
Inputs) and outputs from vehicle.
7
Power Delay:
This connector will allow other vehicle devices that need
to work with the MDR to start-up after the MDR.
8
Power input:
This connector links up with the power from the vehicle
(12/24Vdc).
9
Voltage selector:
Select voltage for cameras. All Brigade cameras use 12V.
10
Optional G sensor:
Connect the optional G sensor here.
4
+24V
+12V
ACC
30A MAX
7
8
5
Publicidad
