Publicidad
Idiomas disponibles
Idiomas disponibles
15
15A
15D
15B
15C
HOT
15 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Supply Tubes (15A), approximately three inches apart.
Connect water Supply Lines (15C) to Faucet Inlets (15B). Hot water supply line goes to hot
inlet fitting indicated by red tag (15D). (Supply lines not included). Follow manufacturer's
instructions when installing supply lines.
16
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
Note: After installation is complete, flush faucet (see step 21).
FAUCET FUNCTIONS
17
17A
17 SPOUT FUNCTION
Spout (17A) can be rotated around the Faucet Body in any direction.
ENGLISH
15A
15B
15C
COLD
5
18
ON
18A
18 VALVE FUNCTION
By lifting Lever Handle (18A) up, the valve will be activated allowing water to flow. The
water flow will increase by continuing to lift up Lever Handle (18A). By rotating Lever
Handle (18A) counterclockwise, the water temperature will decreased to fully cold. By
rotating Lever Handle (18A) clockwise, the water temperature will increased to fully
hot.
19
19B
19A
19 SIDE SPRAY OPERATION
Side Spray (19A) can be pulled out to spray water in any direction. To activate the Side
Spray (19A), press Toggle Button (19B) located on the back of Side Spray (19A).
20
20A
20 SOAP DISPENSER OPERATION
To activate Soap Dispenser (20A), press Dispenser Head (20B) to dispense liquid
soap.
COLD
HOT
18A
19A
20B
Publicidad
