Panasonic WH-MXC09D3E8 Manual De Usuario página 5

SETTING UP THE SPECIAL FUNCTIONS SETTING UP THE SPECIAL FUNCTIONS
• After initial installation, you can manually adjust the settings. The initial setting remains active until the user changes it.
• The remote control can be used for multiple installations. Some functions may not be applicable to your unit.
• Ensure the operation LED is in OFF condition before setting.
Operation
Mode
Timer display
SETTING STATUS
SET CHECK
SEARCH
SELECT
CANCEL
SET
CHECK
1. Press and simultaneously for 5 seconds to enter special setting mode. "SETTING" and "STATUS" indicator is ON.
2. Press or to browse functions.
SELECT
3. Press to enter the function.
4. Press or to enable YES or disable NO function, or set your desired day and time.
SET
5. Press to confi rm.
Operation Mode/
Function * Actual Operation Description
TANK
SOLAR
HEAT
HEAT
TANK
BOOSTER
Day display
TIMER
HEAT
COOL
TANK
QUIET
HEATER
FORCE
OPERATION
Functions*
SELECT FUNCTIONS AND SET YOUR DESIRED TIMER
External Thermo Controller (YES / NO)
To set external thermo controller connection.
Tank Connection (YES / NO)
To set tank connection.
Solar Priority (YES / NO)
To choose the solar use for water tank heat up.
Heating Priority (YES / NO)
To choose the heat pump only use for Heating side during HEAT + TANK mode.
Heating Heat-up Interval Set
To set timer for Heating during HEAT + TANK mode (0.5hour ~ 10hours).
Tank Heat-up Interval Set
To set timer for Tank during HEAT + TANK mode (5minutes ~ 1hour 35minutes).
Booster Heater Delay Time Set
To set delay timer for booster heater to ON if tank temperature is not reached (20minutes ~ 1hour
35minutes).
Sterilization (YES / NO)
To set sterilization, if required.
Sterilization Day & Time Set
To set timer for sterilization (only once a week).
Sterilization Temperature Set
To set temperature for sterilization function (40°C ~ 75°C).
Sterilization Continue Time
To set timer to maintain heating temperature in order to complete the sterilization function
(5minutes ~ 1hour).
YES / NO / Temperature display
OUTDOOR
ACTUAL
HEATER
BOOSTER
SETTING
STATUS
PUMPDW
WATER OUTLET
SETTING / STATUS indicator
CAUTION CAUTION
Actual Operation
Do not use the system
during sterilization
to prevent burnt or
overheat during shower.
5