Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically
allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER/OK button.
2.
Press the ENTER/OK button to select "Country".
3.
Select the appropriate country by pressing the
Press the ENTER/OK button to confirm your choice.
4.
Press the
or
button to select "Auto Store", then press the ENTER/OK button.
5.
Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
ENTER/OK
Press the
6.
After all the available channels are stored, the "Sort" menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER/OK button.
2.
Press the
or
button to select "Manual Store", then press the ENTER/OK button.
3.
Press the ENTER/OK button to select "Programme".
4.
To assign a programme number to a channel, find the correct number by pressing the
and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the
or
2.
Press the ENTER/OK button again, to select "Plug & Play".
3.
The message to "Start Plug & Play" is displayed.
- Storing Channels Automatically
- Storing Channels Manually
button at any time to interrupt the memorization process and return to the "Channel" menu.
button to select "Setup", then press the ENTER/OK button.
or
button.
English-8
or
button