NeuLog NUL-213 Guia página 20

 When using the motion sensor to detect an
individual's movements, try carrying the sensor
instead of pointing it at oneself. For example, to
measure a student's velocities have him/her walk or
run with the sensor while pointing it to the wall.
 Make sure your motion sensor is not mounted near a
computer, monitor or television.
 Sometimes other sources of sound (such as fans,
motors, etc. can affect results).
 Try various sample rates until the cleanest data is
observed, slow rates may provide better results for
certain experiments.
Included with sensor
 NeuLog General Guide.
 Attached metal ultrasonic wave emitter.
Range and operation
modes
ADC
resolution
Resolution
Max sample rate
(S/sec)
Experiment Duration: 1 second to 31 days.
V2018.01
20
Sensor specifications
Distance
(long and short)
0.2 to 10.0 m (long)
0.15 to 2.0 m (short)
1 mm
Velocity
(long and short) (long and short)
±10 m/s
13 bit
0.14 m/s (long) 0.2 m/s
0.48 m/s (short) 2.3 m/s
100
Home
Acceleration
2
±100 m/s
2
(long)
2
(short)
English