Descargar Imprimir esta página

Axis Communications Q1656-DLE Guia De Instalacion página 4

Ocultar thumbs Ver también para Q1656-DLE:

Publicidad

está conforme com os requisitos essenciais e outras
disposições da Directiva 2014/53/CE.
EL
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Axis Communications
AB ΔΗΛΩΝΕΙ ΟΤΙ αυτό το προϊόν
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EK.
Taiwan
取得審驗證明之低功率射頻器材,非經核准,
公司、商號 或使用者均不得擅自變更頻率、加
大功率或變更原設計之特 性及功能。低功率射
頻器材之使用不得影響飛航安全及干擾 合法通
信;經發現有干擾現象時,應立即停用,並改
善至無 干擾時方得繼續使用。前述合法通信,
指依電信管理法規定 作業之無線電通信。低功
率射頻器材須忍受合法通信或工業 、科學及醫
療用電波輻射性電機設備之干擾。
Japan
本製品は、特定無線設備の技術基準適合証明
を受けています。
Mexico
La operación de este equipo está sujeta a las siguientes
dos condiciones:
1.
Es posible que este equipo o dispositivo no cause
interferencia perjudicial.
2.
Este equipo o dispositivo debe aceptar cualquier
interferencia. Incluyendo la que pueda causar su
operación no deseada.
Safety
This product complies with IEC/EN/UL 62368-1,
safety of audio/video and IT equipment, and
IEC/EN/UL 60950-22, Safety of Information
Technology Equipment.
The product shall be grounded via an appropriate
grounding cable.
The power supply used with this product shall have
a rated output voltage within voltage range of
10–28 V DC, and a max power rating of 100 W.
The power supply used with this product shall fulfill
one of the following requirements:
Safety Extra Low Voltage (SELV) according to
clause 2.2 of IEC/EN/UL 60950-1 and Limited
Power Source (LPS) according to clause 2.5 of
IEC/EN/UL 60950-1 or CEC/NEC Class 2 source
of supply as defined in the Canadian Electrical
Code, CSA C22.1 and National Electrical Code,
ANSI/NFPA 70
Class 1 electrical energy source (ES1) and
Class 2 power source (PS2) rated output
power limited to ≤100 W according to
IEC/EN/UL 62368-1
When used with Power over Ethernet (PoE), the
Power Sourcing Equipment (PSE) shall comply with
IEEE 802.3af/802.3at and Limited Power Source (LPS)
according to clause 2.5 of IEC/EN/UL 60950-1 or
annex Q of IEC/EN/UL 62368-1.
We recommend the use of Axis PoE+ midspans or Axis
PoE+ switches.
Photobiological safety
This product fulfills the requirements for
photobiological safety according to IEC/EN 62471
(exempt).
Operating conditions
The Axis product is intended for outdoor use.
Temperature
Operation: -40 °C to
60 °C
(-40 °F to 140 °F)
Start-up at
-30 °C (-22 °F)
When this product has reached the end of its
useful life, dispose of it according to local laws and
regulations. For information about your nearest
designated collection point, contact your local
authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for
incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) is applicable in
the European Union member states. To prevent
potential harm to human health and the environment,
the product must be disposed of in an approved
and environmentally safe recycling process. For
information about your nearest designated collection
point, contact your local authority responsible for
waste disposal. Businesses should contact the product
supplier for information about how to dispose of this
product correctly.
This product complies with the requirements of
Directive 2011/65/EU and 2015/863 on the restriction
of the use of certain hazardous substances in electrical
and electronic equipment (RoHS).
China
This product complies with the requirements
of SJ/T 11364-2014, Marking for the restriction of
hazardous substances in electrical and electronic
products.
有毒有害物质或元素
(Hg)
(Pb)
Humidity
10–100% RH (condens-
ing)
(Cd)
(Cr-
(VI))
(PB-
B)
(PB-
DE)

Publicidad

loading