Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Drain filter
You should clean the drain filter 5 or 6 times a year to prevent it from clogging.
44
English
Untitled-1 44
Untitled-1 44
1. Turn off the washer, and then unplug
the power cord.
2. Gently press the top area of the filter
cover to open.
3. Drain the remaining water inside the
drum. See the Emergency drain section
on page 42.
4. Turn the drain filter knob (A)
counterclockwise, and then drain the
remaining water.
5. Clean the drain filter using a soft brush.
While the drain filter is removed, make
sure the impeller inside the drain pump
is free of debris.
6. Reinsert the drain filter , and then turn
the filter knob clockwise.
7. Close the filter cover .
NOTE
• Some drain filters feature a safety knob
that is designed to prevent children
from accidentally opening the filter
compartment. To open the safety
knob of the drain filter , push in and
turn it counterclockwise. The spring
mechanism of the safety knob helps
open the filter.
• To close the safety knob of the drain
filter , turn it clockwise. The spring
makes a rattling sound, which is normal.
• Before closing the filter cover , make
sure the drain filter is properly inserted.
2022-06-22
2022-06-22
4:11:54
4:11:54
Publicidad
