KODA KODA1400BT Manual De Instrucciones página 5

If the LED doesn't light up when the amplifier is switched on, it means that there is a
malfunction. Please turn the power immediately off and solve the problem. Turn
power on again.
Use the A/B function to select the speaker output according to your speaker cable
connection. If the amplifier is connected to two pairs of speakers at both A & B
channels, please select the A+B channel position.
Warning: Do not connect 2 pairs of 4 Ohms speakers at the same time to the
amplifier A & B outputs.
Bluetooth Connection
Press INPUT button on the remote or the unit to select the BLUETOOTH function.
Turn on the Bluetooth function on your equipment (such a mobile phone), search for
Bluetooth devices. The Bluetooth name of the unit is KODA1400BT, pair your mobile
to KODA1400BT. Once connected, you can play your music.
FM: The speaker cable acts as an FM antenna. If you want to improve FM reception,
adjust the speaker cable position.
Trouble-shooting
If the amplifier doesn't operate properly, check the points in the table below. If this
doesn't solve the problem, please contact your dealer.
Problem
• Bad speaker connection
No sound
• Wrong connection of audio input
socket
©Copyright LOTRONIC 2015
Causes Solution
• Connect securely
• Check the audio input socket
5