Casselin CRCE100 Manual Del Usuario página 13

3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Checking for damage and the completeness of the device must be carried out upon receipt of the package.
In the event of identification of damage due to transport, refuse or accept the delivered product only with
reservations *. A complaint detailing the defects observed must then be made. The collection of damages is
only possible in the event of a complaint formulated within the prescribed time limits, ie 24-48 hours at most.
* written on the correct paper or digital delivery of the carrier.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock greater than 2 months (general condition of the device and all the elements constituting
it)
• No material shaking
• Storage in a closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Electrical data
Temperature range
Dimensions
Weight
Model
Electrical data
Temperature range
Dimensions
Weight
CRCE100
2000 W / 230 V / 50-60 Hz
30 ° C - 70 ° C
W 1000 x D 380 x H 402
mm
10.5 Kg
CRCE150
2800 W / 230 V / 50-60 Hz
30 ° C - 70 ° C
W 1500 x D 380 x H 402
mm
14.5 Kg
CRCE120
2000 W / 230 V / 50-60 Hz
30 ° C - 70 ° C
W 1200 x D 380 x H 402
mm
12.5 Kg
CRCE180
2800 W / 230 V / 50-60 Hz
30 ° C - 70 ° C
W 1800 x D 380 x H 402
mm
16.5 Kg
EN