Polar UA013 Manual De Instrucciones página 4

UK
Pack Contents
The following is included:
• POLAR Refrigerator
• Fish Pans and plates
• Instruction manual
POLAR prides itself on quality and service, ensuring
that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your POLAR dealer immediately.
Installation
Note: If the unit has not been
stored or moved in an upright
position, let it stand upright for
approximately 12 hours before
operation. If in doubt allow to
stand.
1. Remove the appliance from the packaging.
Make sure that all protective plastic film and
coatings are thoroughly removed from all
surfaces.
2. To optimize performance and longevity, ensure
a minimum clearance of 2.5cm is maintained
between the unit and walls and other objects,
with a minimum 5cm clearance on the top.
NEVER LOCATE NEXT TO A HEAT SOURCE.
Note: Before using the appliance
for the first time, clean the
shelves and interior with soapy
water.
3. Set the brakes on the castors to keep the
appliance in position.
Or,
Level the appliance by adjusting the screw
feet.
Fitting the pans and plates
1. Place one set of shelf guides on either side of
the cabinet at the desired height.
2. Slide the pan and plate into place.
3. Repeat for the remaining pans and plates.
4
UA013_ML_A5_v2_20211130.indb 4 UA013_ML_A5_v2_20211130.indb 4
Mounting the castors
Note: The appliance is supplied
with feet by default. However,
castors can be supplied as an
option. Castors can be ordered
using the code of AJ489.
To replace with the castors, follow below steps:
1. Unscrew the feet.
2. Mount the castors in place.
2021/11/30 11:02 2021/11/30 11:02