Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning Your Appliance
·
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
·
Unplug the appliance, remove the content .
·
Wash the inside with a damp warm cloth containing a water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
·
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
·
The outside of the appliance should be cleaned with mild detergent and warm water.
·
Dry the interior and exterior with a soft cloth.
Moving Your Appliance
·
Remove all the content.
·
Securely tape down all loose items inside your appliance.
·
Remove the rollers to prevent damage
·
Tape the door shut.
·
Be sure the appliance stays in the upright position during transportation.
Energy Saving Tips
·
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
·
Overloading the appliance forces the compressor to run longer.
·
Appliance shelves should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
CARE AND MAINTENANCE
11
Publicidad
