Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Wall Mount Kit (LN-S3292D/LN-S4092D)
This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
This LCD TV accepts a 200 mm x 200 mm VESA-compliant mounting interface pad.
Components (Sold separately)
Wall-Bracket
Set-Bracket
How to assemble the Wall Mount Bracket
1
Mark the location on the wall where the hole will be drilled.
Make over 35 mm-depth-hole on the marked location using drill.
Fix anchors
on each hole on the wall.
Connect wall-bracket
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket
3
Insert three Hangers of the set-bracket
Fix set-bracket
and wall-bracket
Note: Before installing the TV on the wall, first connect the cables.
M6 X L14
Screw: 8 EA
to the wall with wood screws
onto the rear side of the TV set and secure the screws
into the grooves of the wall-bracket
with screws
.
M4 X L25
Wood Screw: 7 EA
Anchor: 7 EA
after fitting anchors
into the wall-bracket
.
.
English-57
M4 X L8
Screw: 3 EA
Installation Guide
.
Publicidad
