Descargar Imprimir esta página

MiLECTRIC ECM-B3 Manual De Instrucciones página 43

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
zone selection control. The timer will indicate its set time.
2. When cooking timer expires, the corresponding
cooking zone will be switch off automatically and
show "H" .
NOTE: If you want to change the time after the timer is set, you have to start
from step 1
Cooking Guidelines
Cooking Tips
• When food comes to the boil, reduce the power setting.
• Using a lid will reduce cooking times and save energy by retaining the heat.
• Minimise the amount of liquid or fat to reduce cooking times.
• Start cooking on a high setting and reduce the setting when the food has heated
through.
Simmering, cooking rice
• Simmering occurs below boiling point, at around 85˚C, when bubbles are just
rising occasionally to the surface of the cooking liquid. It is the key to delicious
soups and tender stews because the flavours develop without overcooking the
food. You should also cook egg-based and flourthickened sauces below boiling
point.
• Some tasks, including cooking rice by the absorption method, may require a
setting higher than the lowest setting to ensure the food is cooked properly in
the time recommended.
(set to 6 minutes)
(set to 3 minutes)
16

Publicidad

loading