Resumen de contenidos para PRETUL MOT-6020P
- Página 1 Manual 60 cm (cc) Chainsaws Motor Applies for: Models Codes MOT-6020P 27045 MOT-6018P 27044 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents Technical Data Shut Off Fuel Specifications Cutting Operations General Motor Tools Safety Warnings Felling and Bucking Safety Warnings for Chainsaws Trimming and Pruning Parts Adjustments and Maintenance Safety Devices Troubleshooting Fuel and Oil Supply Authorized Service Centers Bar and Chain Mounting Warranty Policy Start Up CAUTION...
- Página 3 Technical data MOT-6020P MOT-6018P Code 27045 27044 Description Chain Saw Net Weight (without bar) 15,2 lb 14,7 lb Bar Length 20” 18” Chain Pitch 0.325” Chain Gauge 0.05” Drive Sprocket Wheel with 7 (0,325”) sprockets Motor Cylinder Capacity 60 cc...
- Página 4 General Motor Tools Safety Warnings Keep your work area tidy and with good lighting. Use the right personal protection equipment. CAUTION CAUTION Cluttered and dark areas can cause injuries. Using eye protection, anti-dust masks, non-skid safety shoes, helmet, hearing protection and safety gloves Never use the chainsaw in explosive environments or considerably reduce the risk of injury.
- Página 5 Safety Warnings for Chain Saws To Prevent Kickback General Kickback is the sudden and strong movement outwards • Remember, safety is a combination of common sense, from the cut and in the operator direction of the running alert mind and the knowledge of the tool functioning. tool.
- Página 6 Safety Warnings for Chainsaws DANGER • Never operate the chain saw Before operating the chain saw single-handedly. Otherwise, the operator and all the • Never use the chainsaw when tired, ill people present can get injured. DANGER • Keep every part of your body away from the chain when or under the effects of any drug, alcohol or medicine.
- Página 7 Parts Hand Front Protection filter Spark plug key Choke Lever Rear Trigger Bar and Handle Release Chain Housing Chain Guide Bar Primer Chain Tension Chain Bulb Catcher Assembly Adjustment Screw Nuts Scabbard Front Handle Jack-Line Bumper Throttle Spikes Trigger Lubrication Orifice Chain Oil Ventilation...
- Página 8 Safety Devices Chain Brake Turn the lleft • The chain brake (A) function is to swiftly stop the chain hand to activate displacement and protect the hand if kickback strikes (see the chain brake page 5). It is designed considering the predictable kickback movement that throws the chain bar upwards and towards the operator, so that when the brake is pushed with the left hand, the chain stops immediately.
- Página 9 Fuel and Oil Supply Fuel Supply for the motor • Follow the Safety Warnings for handling fuel (see page 5). • Lay down the chainsaw on its side so that the fuel and oil caps face upwards. • Wipe clean the surface of the fuel tank cap to prevent contamination.
- Página 10 Bar and Chain Mounting WARNING • Never start the motor without installing the guide bar first (A), the cutting chain (B) and the bar guard (C). If these parts are not in place the user is exposed to severe injuries. •...
- Página 11 Bar and Chain Mounting • Lift the bar with the chain and fix it to the chainsaw passing the mounting bolts (F) through the bar slot and the loose-fitting space between the bar and the chain and around the brake (G) so that the sprockets fit into the spaces in the cogwheel (H).
- Página 12 Start Up Motor Start Up • Set the chainsaw onto a leveled ground where the bar and change make no contact with the ground or any other object. • Firmly hold the front handle with your left hand, set the right foot onto the rear handle base (A).
- Página 13 Shut Off Shutting Off the Motor • Release the throttle trigger and leave the motor running slow. • Set the switch into the OFF position (H). • Allow the chain to stop before setting the chainsaw onto the ground. • To gain an additional degree of safety set the chain brake (I) when not using the chain saw.
- Página 14 Felling and Bucking Restrictions for felling trees. Do not try it for any reason! • Do not cut trees under rain or strong winds. Wait to the weather to calm down. • Do not cut tress with people or animals in the zone. The safe distance for passersby is explained in the section “When operating the Chainsaw”...
- Página 15 Felling and Bucking Cutting Anchor Roots • Anchor roots are those that stick out too much from the trunk above the ground. When these roots are too big can make felling a tree very difficult. The anchor roots need to be removed before felling the tree.
- Página 16 Felling and Bucking Bucking Above the Trunk • Start cutting in the upper part of the trunk setting the Bucking Above Bucking Below lower side of the chain bar against the trunk. the Trunk the Trunk • Exercise slight pressure downwards. CAUTION •...
- Página 17 Adjustments and Maintenance • Turn off the chainsaw before carrying out any Cutting Cutting maintenance task. Plate Sprocket Plate Sprocket • Wear heavy-duty protecting gloves. Depth Depth Gauge Gauge Cutting Chain Maintenance Rivet • So that the chainsaw makes fast and smooth cuts, the chain need periodical and adequate maintenance.
- Página 18 Adjustments and Maintenance Chain Depth Gauge Depth Gauge Depth 0,025” of the Cutter link Gauge • The chain is built with drive sprockets (depth gauge) placed in front of each sprocket. These prevent the sprockets enter too deep in the wood and get stuck generating kickback.
- Página 19 Adjustments and Maintenance General Cleaning Fuel Filter • Using a brush or compressed air clean and clear the • Check periodically the fuel filter. If contaminated or ventilation slots in the starter unit each time is necessary. damaged, go to a Authorized Service •...
- Página 20 Adjustments and Maintenance Slow speed Adjustment Chainsaw Storage • The slow speed screw is inside the lower orifice in the When storing the chainsaw one month or longer, motor cover and marked with a “T” in one side of the consider the following: jack-line.
- Página 21 Troubleshooting Problem Cause Solution The engine fails to • The switch is in the OFF position. • Set the switch in the ON position. start. • There is no spark. • Check the spark. Remove the motor housing. Remove the spark plug from the cylinder.
- Página 22 Notes ENGLISH...
- Página 23 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800-018-7873 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN MORELOS...
- Página 24 Code Brand MOT-6018P 27044 MOT-6020P 27045 Warranty. Duration: 1 year. Coverage: parts, components and workmanship against manufacturing or operating defects, except if used under conditions other than normal; when it was not operated in accordance with the instructive; was altered or repaired by personnel not authorized by Truper .