Descargar Imprimir esta página

VONROC CD820AA Traducción Del Manual Original página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
EN
The charger has 6 LED indicators (6,7,8) which
indicate the status of the charging process:
Item
Conditions
Stand by
Power on
Charging
Started charging
(10-19V DC±0.5V DC)
Halfway charging
(19-20V DC±0.5V DC)
Finished charging
(20-21V DC±0.5V DC)
Fully
Trickle charging
charged
≤300±150mA
Stop charging
High tem-
High-temperature
perature
protection of the
battery works
• Fully charging the 2Ah battery may take up to
45 minutes.
• Fully charging the 4Ah battery may take up to
85 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
4. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
mains plug from the mains.
Clean the charger casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
6
ENVIRONMENT
LED colour
Red Amber Green
Only for EC countries
On
On
On
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/ EC
Blink
Off
Off
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
On
Blink
Off
and disposed of in an environmentally friendly way.
On
On
Blink
WARRANTY
VONROC products are developed to the highest
On
On
On
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
On
On
On
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or im-
properly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
WWW.VONROC.COM

Publicidad

loading