ARDES ARPIA01 Instrucciones Para El Uso página 10

1 - Onloff switch.
2 - lndicator light.
3 - Heating plate.
Technical data indicated on the appliance.
Only use the plate on dry, clean hair, free of any substances (gel,
hairspray, etc.)
To start the device, insert the plug in the sccket and press the switch (1).
The red pllot light (2) turns on and remains lit far the entire period of use.
After 1/2 minutes, the plate (3) reaches the ideai temperature, of
approximately 200 ° C,
and is ready far use.
Now, piace a section of hair between the plates and hold the latter
firmly closed.
Put the plates as close to scalp as possible, without touching it.
Keep the plates firmly closed and slide them down from the roots to the
ends of the hair, pressing both handles.
Do not keep the hair between the plates for more than 5 seconds. After
use, wait far the plate to cool down before storing it.
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasive products or chemical solvents.
Attenction: keep dry the appliance.
NEVER DIP THE APPLIANCE INTO THE WATER.
Technical informations
Instructions for use
Maintenance
3
GB
2
1
GB
GB
10