Descargar Imprimir esta página

tomado TFS4006B Instrucciones De Uso página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Place the pedestal fan on a flat, stable surface. Check that the protective guards are firmly mounted.
Insert the plug in a socket.
Switching on/off
Turn the on/off button to a position from 1 to 3 to switch on the fan. By turning the on/off button back to 0, you switch off
the appliance.
Position 0 = off
Position 1 = lowest position
Position 2 = middle position
Position 3 = highest position
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement. Press in or pull out the oscillation knob.
Tilting
If you want to change the wind to an upward or downward direction, you can tilt the fan head upwards or downwards.
Loosen the adjustment knob for tilting and change the fan's tilting position. Fasten the adjustment knob to fix the fan
on the new position.
Warning: make sure the fan is switched off when you want to change the tilting position.
Adjusting the height of the pedestal
In order to adjust the height, loosen the pedestal adjustment knob and move the fan upwards or downwards. Properly hold
on to the fan when loosening the pedestal adjustment knob, so it cannot drop down unexpectedly. Re-tighten the pedestal
adjustment knob when the fan is at the required height. The height can be adjusted from 90 to 120 cm.
Warning: make sure the fan is switched off when you want to change the height.
Before cleaning the fan, you must switch it off by pressing position button 0 and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry
properly.
• If necessary, you can clean the protective guard using a vacuum cleaner
(nozzle).
• For cleaning the fan blade, you must first remove the front protective guard.
Loosen all screws from the edge of the rear protective guard. Clean the fan
blade with a slightly damp cloth and a mild cleaning agent if necessary.
Make sure no water ends up in the motor casing. Properly dry everything
and re-assemble the fan.
• Do not use aggressive or abrasive cleaning agents for cleaning the
appliance.
• Never submerge the fan in water or any other liquid.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collection of electric and electronic products.
Correct disposal of the product prevents negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
OPERATING THE PEDESTAL FAN
CLEANING AND MAINTENANCE
RECYCLING
EN - 14

Publicidad

loading