Publicidad
Idiomas disponibles
Idiomas disponibles
SE 1600
basins or other vessels containing water.
• When the hairdryer is used in a bathroom, unplug it after
use since the proximity of water presents a hazard even
when the hairdryer is switched off.
• For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for
advice.
DESCRIPTION
1. Concentrator
2. Air inlet filter
3. Cold air button
4. Folding handle
5. Speed knob
6. Hang-up handle
DRYING
1. Put the plug in the wall socket. Make sure the switch is always in position 0 when you plug it.
2. Switch the appliance on by selecting the desired setting.
a. Position 1, low speed and warm air flow, to shape your hairstyle.
b. Position 2, high speed and very hot air flow, for quick drying.
c. Cool button, push this button in whatever of two positions (1 or 2) and hairdryer will work with
cool air flow in low speed or high speed.
3. Dry your hair by making brushing movements while holding the dryer at a small distance from your hair.
4. When you finish, select in switch 0 position and unplug the hairdryer.
STYLING ATTACHMENTS
Concentrator
The concentrator enables you to direct the airflow at your hair that you are styling.
Connect the concentrator by simply snapping it onto the appliance. Disconnect it by pulling it off.
you should wait to cool it down before remove it because it will be hot after using and you could burn.
CLEANING
1. Unplug the appliance before cleaning.
2. Remove the grill in order to eliminate the dust and hair.
3. The appliance can be cleaned with a dry cloth.
4. The attachment can be cleaned with a moist cloth or rinsed under a running tap.
Remove the attachment from the appliance before cleaning them. Make sure the attachment are dry before
using or storing them.
Never rinse the appliance with water.
8
Publicidad
