Jung FM ES 3680 ZS Instrucciones De Servicio página 4

eNet
Sensor de energía vía radio, enchufable
5.2 Lista de parámetros
Settings window
Device settings
Parameters
Manual commissioning
Repeater mode
Transmission mode
Settings, channel
Parameters
Manual commissioning
Transmit voltage
Transmit current
Transmit effective output
Transmit apparent output
Transmit idle output
Transmit absolute effective
energy
82582203
J:0082582203
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Single, Double
Basic setting: Double
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
4/7
Explanations
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device can­
not be reset to the factory set­
ting.
In addition to its other func­
tions, the device can be used
as a repeater. In the "On" set­
ting, the device repeats all the
received telegrams.
The transmission of all measu­
red value telegrams is repea­
ted to guarantee increased
transmission security (no un­
secured transmission). It is
possible to switch over to sim­
ple transmission.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can­
not be reset to the factory set­
ting.
Transmits the current voltage
value.
Transmits the current current
value.
Transmits the average effecti­
ve output. If negative values
are displayed, then effective
output is fed in, e.g. via a pho­
tovoltaic system.
Transmits the current appa­
rent output value.
Transmits the current value of
the basic oscillation idle out­
put. If negative values are dis­
played, this is a capacitive idle
power. Positive values show
an inductive idle power.
Transmits the cumulative va­
lue of the effective energy. If
negative values are displayed,
then effective energy is fed in,
e.g. via a photovoltaic system.
14.03.2014