Publicidad
Idiomas disponibles
Idiomas disponibles
TH 8002
• The towel warmer must be installed such that switches
and other controls cannot be touched while a person is in
the bath or shower.
• WARNING: In order to avoid a hazard for very young
children, this appliance must be installed so that lower
rail heater is at least 60cm above the floor.
INSTRUCTION MANUAL
This Towel Warmer is intended for the use in bathrooms or laundry areas.
SPECIFICATIONS
Power Source: 230V AC, 50Hz, Class I
Rating Power Input: 90W
Unit Size: 45 x 60 x 9.5 (H x W x D) cm
Unit Weight: 2.3kgs
OPERATING INSTRUCTION
1. Please read the wall-mount installation instruction carefully to understand how to install on your ideal
location of the wall.
2. Make sure to complete the installation.
3. Plug the power cord into an electrical outlet.
4. After connecting to suitable power supply 230V AC, 50Hz, the appliance starts up and the indicator lamp
lights up.
-Screw anchor for wall mounting
-Screws M4x24PT
-Tower rail
-Indicator Lamp
-Power Plug
-Paper's card
STEP 1 : Drill holes on the wall according to the paper card's holes; Take away the paper card.
STEP 2: Insert screw anchor into the holes.
STEP 3: Turns the screws in.
STEP 4: Put the warmer on screws.
LIGHT
ON/OFF SWITCH BOTTOM
Paper's card
9
Publicidad
