Buffalo L490 Manual De Instrucciones página 7

Telephone Helpline: 0845 146 2887 (United Kingdom)
Operation
Connecting the Element/Control Panel
(L370/P107/L484/L485)
The Element and Control Panel are supplied as a single detachable
part to aid in cleaning the appliance.
To connect to the body of the appliance:
Locate the lugs on the rear of the appliance with the tabs on the
1.
rear of the element/panel unit.
Ensure the safety switch is aligned with the slots on the
2.
appliance [A].
Lower the unit onto the appliance, ensuring the tabs are located
3.
inside the lugs on the rear of the appliance [B].
Connecting the Element/Control Panel
(L490/L495/L300/L301)
The Element and Control Panel are supplied as a single detachable
part to aid in cleaning the appliance.
To connect to the body of the appliance; with the element/panel unit
tipped backwards:
Slot the tab on the rear of the element/panel unit under the lugs
1.
on the main body of the appliance.
Lower the unit onto the appliance [A], ensuring the safety
2.
switch is aligned with the slots in the body of the appliance [B].
Thermal Cut-out reset cover
Thermal Cut-out reset switch
Power indicator light
Thermostat
Element
Safety switch
UK
[A]
[B]
[A]
[B]
2