Publicidad
Idiomas disponibles
Idiomas disponibles
CP 66142
FAN WORKING
- Select the fan speed by pressing the speed control button on the remote control transmitter :
HI: High Speed MED : Medium Speed LOW : Low Speed OFF : Off
- The switch on motor housing for controlling the fan blades rotating direction controls the direction of air
movement.
- Caution : Before using this rotating direction switch, turn OFF the fan and ensure the fan stops rotating to
prevent injury to yourself and damage to the moto.
- Cold weather: Push the switch 'UP' so that the blades will bring the warm air trapped near the ceiling fan
to move downwards throughout the room.
- Hot weather: Push switch 'DOWN' so that the blades will create a breeze and circulate the air to the room.
- Pressing the 'ON/OFF' light button on the remote control transmitter can control the turning on or off of
the light.
REMOTE CONTROL
- Use the remote control transmitter to change the speed of the fan and to switch the light and fan on or
off.
- Replace the batteries by sliding the battery compartment cover on the remote control transmitter in the
direction of the arrow, fit 2 x 'AAA' batteries, and ensure the polarity of the batteries match with the figures
shown in the battery compartment. (Note: Batteries NOT included). Re‐assemble the battery compartment
cover.
- Always ensure the battery compartment cover is closed properly.
- Don't expose the remote control to direct sunlight.
- Don't attempt to recharge expired bateries. There are special rechargeable batteries, which are clearly
marked with.
- Don't dispose of batteries in fire to avoid explosion.
- You can install the remote support, fixing it with two screws.
TRANSMITTER OPERATION
Point the remote at the infrared sensor to power the fan.
LIGHT ON: Make a short press to switch on the light.
LIGHT OFF: Make a short press to switch off the light
HI: Select high speed fan.
MED: Select medium speed fan.
LOW: Select low speed fan.
VENTILADOR OFF: Turn off the fan rotation.
12
Publicidad
