Orbegozo TWM 0975 Manual De Instrucciones página 8

TWM 0975
1. DESCRIPTION
1. Remote control support
2. Control panel
3. Indicator lights
4. Air outlet
5. Base
6. Remote control
2. ASSEMBLY INSTRUCTIONS
1. Place the main body of fan on a table to assemble base B. Route the fan cable
through the hole in the base B.
2. Install base B at the bottom of the fan leaving the cable outlet facing the back of the fan. Install the base
A. Pass the cable through the cable outlet.
3. Please tightly fix the 2 screw in foundation which is located in the center of bottom.
3. HOW TO USE (Caution: Fan must be assembled with the base before use!)
-
Connect the machine to the power supply.
-
Press the "ON/OFF" button to turn on the fan.
-
Press the "ON/OFF" button again, fan will be switch off.
-
Select Low, Medium and High speed by pressing "SPEED" button.
-
Press "OSC" button to turn on the oscillation function. Press again to turn off.
-
Press "TIMER" button, to set up to 0,5 hour to 4 hours timer setting.
8