Miele professional PW 6101 Instrucciones De Montaje página 4

,
Service and repair work should only be carried out by suitably qualified persons in
accordance with all appropriate local and national safety regulations.
Module 2 - Liquid dispenser 7 - 12 fitting -
PW 6101 / 6131 / 6161 / 6201 / 6241 / 6321
Procedure:
^ Disconnect the machine from the mains.
^ Remove the machine lid.
^ Remove the electrical connection cover plate from the rear of the machine.
^ Fit the electronic module EZL 230 a, adapter EV 230 b, Fig. 2, and cable through-feeds c,
Fig. 1.
^ Connect the electronic module EZL 230 and adapter EV 230, Fig. 2, in accordance with the
wiring diagram.
^ Modify the connection from plug 46X on electronic module 2N1L, EZL 230, to connect
electronic module 3N1L in series in the circuit, see the wiring diagram.
Module registration
^ Access the Service level (service mode).
Select menu item Service settings, Sign on module, EZL code 2, Sign on module?
Press the "Save" button S. The module is now registered.
^ Select menu item Service settings, Basic settings, Dispensing.
Set Dispenser display to On.
^ Press the "Save" button S.
^ Interrupt the mains supply to quit the service mode.
^ Carry out a check for correct operation.
^ Refit the electrical connection cover plate. Refit the machine lid.
4
All manuals and user guides at all-guides.com
M.-Nr. 06 572 531