Publicidad
Idiomas disponibles
Idiomas disponibles
Package Contents
• Gigabit High-Power PoE+ Injector
• External Power Supply
- NPOE-30W-1G: C5 to NEMA 5-15P Power Cable - 2 ft.
- NPOE-30W-1G-INT: C5 to CEE 7/16 Schuko (Europe) and C5 to
BS 1363 (UK)
• Owner's Manual
Product Features
• Save time and money by delivering up to 10/100/1000 Mbps of data
and up to 30W of power via existing network cables.
• Supports distances up to 328 ft. (100 m).
• Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
(Wireless LAN access points and bridges, VoIP, IP surveillance cameras,
etc.).
• Supports IEEE 802.3at/af detection and short-circuit, overload and
high-voltage protection.
• Simple plug-and-play design with no configuration required.
• Fanless design ideal for silent operation.
• Flexible design allows for either desktop or surface-mount use.
Installation
1. Using existing or newly run Cat5e/6 cable, connect a LAN port on a
non-PoE switch or network jack to the LAN port on the injector.
2. Connect any IEEE 802.3af/at-compliant PoE device to the POE port on
the injector.
3. Use the included power cable (and compatible plug, if applicable) to
connect the injector to an AC outlet.
2
Publicidad
