Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Omega Heavy Duty Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end
of a vehicle. Use as a matched pair to support one end of a vehicle only.
SPECIFICATIONS
Model
32105B
32107B
Capacity (per pair)
10 Ton
Height
Adjustment
Holes
Roll Pin
Extension Tube
Support Bar
Lanyard
Support Bar Holder
Figure 1 - Models 32105B & 32107B Components
Base Size
Min. Height
16-1/8" x 15-5/8"
16-1/8" x 16-1/8"
Saddle
Extension Tube
Collar
Base Section
2
Max. Height
18-5/8"
31-1/8"
27-7/8"
47-3/8"
Publicidad
