Garland CHIPPER 790 QG Manual De Instrucciones página 43

PIECES
Engine oil
Air fi lter
Tension transmission belt
Spark plug
Muffler
Fuel sediment deposits
Filter and fuel tank
Fuel inlet tube
8.4.1. AIR FILTER
The dirt in the air cleaner will cause a reduction in the
performance of the machine. Check and clean this
element. If you notice damage or alterations to the
filter, replace it with a new one.
The foam filter can be cleaned in the following way:
- Remove the protective cap from the filter.
- Remove the filter.
- Clean the filter with soapy water.
- Rinse the filter with clean water.
- Dry the filter.
- Once dry, moisten it with 2 drops of oil (if you wet
ACTION
Level test
Change
Check
Cleaning
Replace
Cleaning and adjustment
Adjustment
Replace
Cleaning
Cleaning
Cleaning
Check and replace if necessary
- Install the filter on the machine.
- Put on the protective cap.
the air filter installed.
8.4.2. CHANGING THE ENGINE OIL
Perform the oil change only while the engine is still
hot.
43/148
•
•
•
•
the filter with too much oil the machine cannot
start).
Note: The engine should never function without
English
•
•
•
•
•
•
•
•
•