Publicidad
4
DISP
TITLE
(Remote Control Unit/
Unité de télécommande/
Unidad de control remoto)
5
1 / 150
Entered number/
Numéro entré/
Número memorizado
6
TITLE
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
28
4.6
AL
Maximum number of titles
available*/Numéro max.
de titres utilisables*/Número
máximo de títulos
utilizables*
DISP
CD Operation
Titling Disc (Continued)
Press the TITLE button to store the first
character. The first character will stop blinking
and the display will automatically advance to
the next character. When that character begins
to blink, you may choose the next letter or
symbol of your title.
Repeat steps
and
above to complete the
titling. All 8 character positions should be filled.
Use spaces, if necessary, to complete your
title.
Upon completion of entering the title, the Title
status will be displayed. The title number of the
title just entered and total number of titles
available will be shown.
Note: * The maximum of titles available will
vary, depending upon the CD Shuttle
being used.
Press and hold the TITLE button for at least 3
seconds to record the title.
Notes:
•
The titles will remain in memory unless
battery power is disconnected.
•
When the CD Shuttle power supply is
disconnected (Ai-NET cable is removed),
the memory for the entered titles is cleared.
•
When the memory capacity for disc titles is
used up, "FULL DATA" will be shown in the
display. At this point no titles can be
programmed unless others are selectively
erased. Refer to the Owner's Manual of the
CD Shuttle interconnected for information
about how may discs you can title.
English
Publicidad
