Publicidad
Idiomas disponibles
Idiomas disponibles
4 4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
Phone jack Type
•
You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and
(PC)
the TV, which is specified in the manual.
* For other models, connect to the USB port.
(PC)
* The connection interface may differ from your TV.
(PC)
(PC)
- or
(PC)
(PC)
Customer Computer
1
6
RS-232C
(Serial port)
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1.
Press SETTINGS to access the main menus.
Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
2.
3.
Press the Navigation buttons to scroll to SET ID and press OK.
4.
Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5.
When you are finished, press EXIT.
* (Depending on model)
1
3
1
3
2
2
1
3
1
3
2
2
RS-232C configurations
3-Wire Configurations(Not standard)
5
RXD
RS-232C IN
(CONTROL & SERVICE)
TXD
RS-232C IN
(CONTROL & SERVICE)
GND
9
RXD
TXD
GND
(TV)
(TV)
RS-232C IN
(CONTROL & SERVICE)
(TV)
RS-232C IN
(CONTROL & SERVICE)
(TV)
(TV)
(TV)
(TV)
RS-232C IN
(TV)
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
PC
TV
2
3
5
OR
3
2
5
D-Sub 9
Phone
2
TXD
1
RXD
3
GND
2
TXD
1
RXD
3
GND
Publicidad
