STEP 20
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
All manuals and user guides at all-guides.com
2 people are required for this step.
8
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x51)
#A21110
D
Flush the bottom edge of the back panel
with the bottom edge of the bottom (D).
27
11