Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To determine the product's power requirements
(circuit breaker, power outlet, and wiring), use the
cations chart. The listed current rating indicates
the product's average current draw under normal
conditions.
•
Always connect the product to a protected
circuit (circuit breaker or fuse). Make sure the
product has an appropriate electrical ground to
•
To eliminate unnecessary wear and improve its
lifespan, during periods of non-use completely
disconnect the product from power via breaker
or by unplugging it.
Never connect the product to a rheostat (variable
resistor) or dimmer circuit, even if the rheostat or
dimmer channel serves only as a 0 to 100% switch.
1. Disconnect the product from power.
2. Twist the fuse holder cap counterclockwise to
loosen the fuse holder and pull straight out.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and
reconnect power.
•
Disconnect the product from power before re-
placing the fuse.
•
Always replace a blown fuse with another of the
same type and rating.
Before mounting the product, read and follow the
safety recommendations indicated in the Safety
Notes.
P. 6
Tecshow Stratus 1000 |
English version
This product may not be tilted. This product should
only be mounted/used on a level surface.
-
-
•
Before deciding on a location, always make
sure there is easy access to the product for
•
Make sure that the structure or surface onto
which you are mounting the product can sup-
port the product's weight (see the Technical
•
When mounting the product overhead, always
use a safety cable. Mount the product securely
to a rigging point, such as an elevated platform
or a truss.
•
When rigging the product onto a truss, you
should use a mounting clamp of appropriate
weight capacity. The bracket has 13-mm holes,
which are appropriate for this purpose.
•
and allow for surface mounting. When mount-
product and cables are away from people and
vehicles.
Safety
Cable
Bracket Adjustment Knob
Mounting
Clamp
Mounting
Bracket
Nozzle
Publicidad
Tabla de contenido
