E-MOTIVE VSERVERMINI01 V01 Guia De Instalacion

Video Server Mini
Installation Guide
Ref No. VSERVER-MINI01 V01
See below for labelled connection points on the Video Server Mini.
Fig 1: Front View
Fig 2: Rear View
Set Up Instructions
1. Connnect 12V DC power supply
to socket marked "DC 12V" using
power supply and cable provided
2. Connect Video Server Mini to the
network using one of the LAN ports
with an RJ45 LAN/Ethernet patch
cable (not provided).
3. Ports "HDMI 1" and "HDMI 2" are
for connection to external display,
to be used for monitoring of
output or setup of Video Server
Mini (not provided).
4. USB ports for use to load content
onto internal storage of Video
Server Mini.
5. A USB TV tuner is supplied with
the Video Server Mini. This can be
connected to any available USB
port on the Video Server Mini.
Fig 3. With Tuner
6. For terrestrial TV signals utilise the
supplied USB TV adapter. The USB
TV tuner adapter can be used with
external antenna signals utilising
the "Belling-Lee connector" on the
end of the USB adapter.
7. For Composite Video or S-Video
connection you will neeed to
connect the adapter provided to
the USB TV Tuner utilising the port
on the side of the device.
8. For S-Video connect the external
device to the S-Video connector
on the USB TV Tuner.
9. For Composite Video connect the
video feed to the "Yellow" plug and
the left and right audio signal to
the "Red" and the "White" plugs.
Avire Ltd
Unit 1, The Switchback
Gardner Road
Maidenhead
Berkshire
SL6 7RJ, UK
Caution:
1. Risk of electric shock. Never
remove the casing of the unit
2. Ensure that the Power Supply is
connected properly and that the
voltage is correct before turning on
the System
3. Ensure that the unit is handled with
care. Do not place heavy items on
top of the unit. Do not have major
movement on the unit when the
system is in operation
4. Do not block or allow dust to
accumulate in the cooling vents
T: 01628 540100
F: 01628 621947
E: sales.uk@avire-global.com
W: www.avire-global.com