Publicidad
Idiomas disponibles
Idiomas disponibles
Button Functions
1.
2.
3.
4.
5.
6.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs,
you might need to press the REC button once, then
press it again for three seconds.
Some buttons on the remote might have functions
that are referred to by different names on the
device you are controlling. E.G. PREV.CHAN
may be called RECALL, or ENTER may be
called DISPLAY. These differences depend on the
brand and model of your product. Also, this remote
can only operate features that exist on your prod-
uct. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
All manuals and user guides at all-guides.com
12.
11.
10.
9.
8.
7.
4
Button Functions, cont.
1. Red Indicator Lights when any button is
pressed.
2. TV, VCR, CBL Selects product to be
operated.
3. MUTE Turns off the TV sound while the
picture remains.
4. CHANNEL UP/DOWN Changes the
channels.
5. ENTER Used after direct channel number
entry to immediately change to the selected
channel.
6. RECORD, PLAY, STOP, REW, FF,
PAUSE VCR control buttons operate your
VCR even when the remote is set to operate
the TV. Also operates DVD Scan -/+.
7. TV/VCR For some TVs, press repeatedly to
select from available viewing sources
(antenna, cable box, VCR, etc.).
8. NUMBERS Enter numbers for direct
channel selection. Some products require
Enter to be pressed after channel selection.
9. VOLUME UP/DOWN Changes the volume
level of the product, normally the TV.
10. PREV. CHAN Returns to the previously
selected channel, or DVD repeat toggle.
11. CODE SEARCH Used for setup.
12. POWER Turns product On or Off.
TV/VCR
When in TV mode the TV/VCR button performs the
INPUT source switch function.
When in a mode that has been programmed for VCR the
TV/VCR button performs the TV/VCR antenna switch
function.
When in a mode that has been programmed for Cable the
TV/VCR button performs the A.B switch function.
When in a mode that has been programmed for SAT the
TV/VCR button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the
TV/VCR button performs the DVD Setup function.
5
Publicidad
