MADER KWID1801-20 Manual De Instrucciones página 38

8.3 F /
ORWARD REVERSE SWITCH
 Push the forward/reverse switch (2) from right to left side to drill holes and
fasten screws.
 Push the forward/reverse switch (2) from left to right side to loosen screws.
Always wait until the motor has come to a complete standstill before
changing the direction of rotation.
8.4 S
WITCHING ON AND OFF
 To switch on the machine, press the on/off switch (1).
 To switch off the machine, release the on/off switch.
8.5 V
ARIABLE SPEED
 Applying more pressure to the On/Off switch will increase the speed.
 Applying less pressure to the On/Off switch will decrease the speed.
9. CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 C
LEANING
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.