HO 255-HO 455
= bottom heating element: heats the lower part of the oven in particular
- Timer. Regulates oven functions; turn the timer knob to the desired cooking time, after which the
heating elements will switch off. The knob will turn gradually towards the "0" position, and when it
reaches "0", a buzzer sounds.
The oven is provided also with the following accessories and elements:
- Wire rack that can be placed in one of the slots provided
- Bake tray that can be placed in one of the slots provided
- Crumb tray that can be placed at the bottom to distribute lower heat uniformly
- Pilot light: on when resistances are working
WHEN USING FOR THE FIRST TIME
Before being used for cooking, the appliance should be switched on "empty" to eliminate the "smell of
new" and any oils remaining from the production process. Insert the plug in the power socket, turn
thermostat to "max", turn the timer knob to position "20", position the selector
knob and leave
the appliance on. When the cycle ends, remove the plug from the socket and wait until the appliance is
cool before removing the accessories. These must be washed in hot water with normal dishwashing
liquid, rinsed and dried before being returned to their position.
USING THE OVEN
Generally speaking it is not necessary to preheat the oven, but for some foods (meat, pastries) it is
advisable to preheat the oven as described above, making sure the door is closed properly.
Put the shelf grids or/and enamel baking tray at the desired height in the slots in the oven.
• Place the enamel tray at the bottom of the oven.
• Put the food (in the plate or baking tray, etc.) and shut the door.
• Follow these instructions:
- Insert the plug in the power socket
- Turn the thermostat knob clockwise to the temperature required
- Turn the selector switch to desiderate position
- Turn the timer knob to the time required: the pilot light and the oven starts to heat: if cooking time is
not sufficient, restart the timer for the time still required.
When cooking is completed, turn the selector switch to
; the thermostat to "0" and remove the
plug from the power socket.
18