Publicidad
Idiomas disponibles
Idiomas disponibles
97849 Instructions.quark
2/26/02
1:23 PM
Page 3
CONNECTING YOUR MOUSE
USB (i.e. Universal Serial Bus) is a new way to connect PCs and peripherals. It
offers true plug and play setup and the ability to plug in peripherals without hav-
ing to turn off your PC. Simply unplug one USB peripheral and plug in another,
and your PC will automatically recognize the new device and configure the nec-
essary driver.
To use this mouse, you need to have a PC with a USB port and
Windows 98 or above. To determine if your PC has a USB port,
check the back of the machine for a port with the USB icon or
consult the manual that came with your PC.
USB Port
To connect to a USB port: Plug the cable into your computer's
USB port (or a USB port on a hub connected to your computer). You do not need
to turn off your computer before connecting or disconnecting a USB device.
INSTALLING YOUR iWHEELWORKS SOFTWARE
In order to take full advantage of your mouse, you must install the enclosed
software. While your input device will work as a basic mouse once it is plugged
in, the software must be loaded to use the programmable features.
To install from Windows® 98/NT/2000:
1. Insert the Mouse SETUP DISK into your floppy disk drive.
2. Click the Start button and then click Run.
3. Now type <drive>:\ setup. For example, if the Mouse SETUP DISK is in
drive A, type: a:\ setup
4. Now click OK . (Follow the on-screen instructions.)
NOTE: If you do not restart your computer, the software will not operate.
5. Once restarted, the mouse icon 8 should appear in the Windows® system
tray. Double click the icon to bring up your mouse control panel.
1
Publicidad
