Publicidad
Idiomas disponibles
Idiomas disponibles
Resetting the Picture Settings to the Factory Defaults
Changing the Picture Size
Changing the Auto Wide (4:3)
All manuals and user guides at all-guides.com
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the "Changing the Picture Standard"
instructions number 1 to 3 on page 13.
2.
Press the
or
button to select "Reset", then press the ENTER button.
3.
Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
You can select the picture size which best corresponds to your viewing requirements.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Picture", then press the ENTER button.
2.
Press the
or
button to select "Size", then press the ENTER button.
3.
Select the required option by pressing the
Press the ENTER button.
4.
Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", "S-Video" and "DTV"
mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom : Select
by pressing the
picture up and down. After selecting
reduce the picture size in the vertical direction.
WIDE 4:3 : Move the screen up/down using the
by pressing the
The Zoom mode cannot be selected in the DTV mode.
Ajusts the display picture size to 4:3 appropriate for input signal
1.
Press the MENU button to display the menu.
Press the
or
button to select "Picture", then press the ENTER button.
2.
Press the
or
button to select "Auto Wide (4:3)", then press the ENTER button.
3.
Select the required option by pressing the
Press the ENTER button.
4.
Press the EXIT button to exit.
These functions don't work in "Component", "HDMI1", "HDMI2" and "PC" mode.
The Zoom mode cannot be selected in the DTV mode.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
English-15
or
button.
or
buttons. Use the
, use the
or
button after selecting the
or ENTER button.
or
button.
or
button to move the
or
button to magnify or
Publicidad
